Search This Blog

Working principle of slow wire processing

 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much bett...

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form o...

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form o...

Which Metal Should You Choose For Die Casting?

Which Metal Should You Choose For Die Casting?

Which Metal Should You Choose For Die Casting

If you're designing volume die casting of a part or product, choose a manufacturing process that can build it using the same material. In metal die casting, you can consider the process of cold chamber die casting process, which can build parts from different metal materials one layer at a time. Cold chamber die casting services is a injection chamber and the injection punch are not immersed in the molten metal, but a quantitative amount of molten metal is poured into the injection chamber and then injected. ,. This way, it can create highly complex shapes when other manufacturing methods can't.

However, you need to know the best metals that can be used for your display die casting or other project. Choosing the correct metal will ensure optimum results and an effective die casting process that will improve your chances of success.

Which metals can be used in die casting?

Which Metal Should You Choose For Die Casting?Reputable manufacturers offer a range of materials, such as aluminum, zinc, copper, and magneium. These metals come with various properties, making them ideal for a range of applications. For instance, if you require volume production of automotive parts, pipes, or valves; aluminum and aluminum alloy can be a good option for offering outstanding corrosion resistance.

Metals to avoid in die casting

Any metal may be used in die casting if it can be supplied as an appropriate metal. However, materials that burn instead of melt at high temperatures should be avoided as they cannot be melted safely or sintered. Metals to avoid in die casting:

  • Stainless Steel
  • Titanium
  • Greek Ascoloy.
  • Carp 49
  • Hastelloy
  • Nitronic-60
  • Inconel
  • Hymu 80
  • More

Benefits of Die Casting with High Volume

High Volume Thin Wall Die Casting and cnc machining is a versatile metal manufacturing technology that lets you build functional metal rapid prototypes and parts with complex shapes or geometries. It's used extensively in the medical, automotive, and aerospace industries for fulfilling part consolidation and weight-saving application requirements. Creating prototypes and low-volume end-use parts out of Thin Wall Die Casting metals are typically detailed but not necessarily structurally sound.

Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112