Search This Blog

Working principle of slow wire processing

 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much better t

Classification of CNC Machining Occupation Levels

1. Blue-collar layer:   That is, CNC machining operation technicians, proficient in machining and CNC machining process knowledge, proficient in the operation and manual programming of CNC machine tools (attributes: automated machine tools), understand automatic programming and simple maintenance of CNC machine tools (attributes: automated machine tools), such There is a large market demand for personnel, and they are suitable for operating workers of CNC machine tools (attributes: automated machine tools) in the workshop, but due to their single knowledge, their wages will not be much higher.   2. Gray collar layer:   One, CNC machining programmer:   Master the knowledge of 5 Axis CNC machining Aluminum   technology and the operation of CNC machine tools (attributes: automated machine tools), be familiar with the design and manufacturing expertise of complex molds (title: mother of industry), and be proficient in 3D CAD/CAM software, such as UG, GOOGLE PRO/E, etc. ; Familiar with CNC

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette

AUO M170EG01 VF

AUO M170EG01 VF
#M170EG01 VF AUO M170EG01 VF New AUO 17inch LCM 1280×1024 250 1000:1 85/85/80/80 16.7M CCFL LVDS, M170EG01 VF pictures, M170EG01 VF price, #M170EG01 VF supplier
-------------------------------------------------------------------
Email: [email protected]

-------------------------------------------------------------------
Manufacturer AUO
Model Name M170EG01 VF
Screen Size 17.0 inch
Pixel Number 1280(RGB)×1024   (SXGA)  96PPI 
Active Area(mm) 337.92 × 270.336 (H×V)
Bezel Area(mm) 341.6 × 274.0 (H×V)
Luminance 300 (Typ.)(cd/m²)
Viewing Angle 80/80/80/80 (Typ.)(CR≥10) 
Color Depth 16.2M   72% NTSC
Mass 1.99Kgs (Typ.)
Refresh Rate 60Hz  
Screen Type LCM ,   a-Si TFT-LCD
Arrangement RGB Vertical Stripe
Outline(mm) 358.5 × 296.5 × 15.8 (H×V×D)
Treatment Antiglare, Hard coating (3H)
Contrast Ratio 1000 : 1 (Typ.) (TM)    
Work Mode TN, Normally White, Transmissive 
Response 3.5/1.5 (Typ.)(Tr/Td) ms
Backlight 4 pcs CCFL , 50K hours , No Driver
Used for Desktop Monitor
Touchscreen Without
Signal Type LVDS (2 ch, 8-bit) , 30 pins Connector
Voltage Supply 5.0V (Typ.) 
Max. Ratings Storage Temp.: -20 ~ 60 °C    Operating Temp.: 0 ~ 50 °C 
M170EG01 VF inverter, M170EG01 VF power supply, M170EG01 VF electronic board, M170EG01 VF VGA board, M170EG01 VF touchscreen available.

Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112