Search This Blog

Working principle of slow wire processing

 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much bett...

What are the rules for metal stamping die scrap tube?

The Purpose Standardize the management of the scrapping of the company's metal stamping dies, prevent the loss of company assets, and formulate this system specially. Scope of application It is suitable for the management of the company's scrap molds. Definition If the molds listed in the assets of the company fall under one of the following circumstances, the use management department may apply for scrapping. 1. Molds that exceed the specified service life. 2. The mold is severely damaged by accidents or accidents, and molds that cannot be repaired or have no repair value. 3. Metal stamping dies that have not reached the service life, but due to safety, quality, efficiency and other issues, the repair still fails to meet the minimum requirements of the customer's product process or affects the production safety and efficiency. 4. Product customers have stopped placing orders or have not placed orders for molds in several years. 4. Responsibilities 1. Responsibilities of th...

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form o...

AUO C070FW02 V0

AUO C070FW02 V0
#C070FW02 V0 AUO C070FW02 V0 New AUO 7inch LCM 480×234 500 300:1 60/60/60/40 Full color CCFL Analog, C070FW02 V0 pictures, C070FW02 V0 price, #C070FW02 V0 supplier
-------------------------------------------------------------------
Email: [email protected]

-------------------------------------------------------------------
Brand AUO
Model C070FW02 V0
Diagonal Size 7.0 inch
Type a-Si TFT-LCD, LCM
Pixel Format 480(RGB)×234  76PPI
Configuration RGB Vertical Stripe
Active Area 154.08(H)×86.58(V) mm
Outline Dim. 164.9(H)×100(V) ×6(D) mm
Bezel Area 156.4(H)×89.0(V) mm
Treatment Antiglare (Haze 25%)
Luminance 500 cd/m² (Typ.)
Contrast Ratio 300:1 (Typ.) (TM)    
View Direction 12 o'clock
Response Time 12/18 (Typ.)(Tr/Td)
Viewing Angle 60/60/60/40 (Typ.)(CR≥10) Left / Right / Up / Down
Operating Mode TN, Normally White, Transmissive
Support Color Full color
Light Source CCFL  [1 pcs] , 10K hours , W/O Driver
Weight 160±10g
Designed For Automotive Display
Touch Panel Without
Interface Type TFT Specific Analog RGB , 30 pins FPC
Power Supply 5/5/15/-10V (Typ.)(VCC/AVDD/VGH/VGL)
Environment Operating Temperature: -30 ~ 75 °C ; Storage Temperature: -40 ~ 85 °C ; Vibration Level: 2.9G (28.4 m/s²)
C070FW02 V0 inverter, C070FW02 V0 power supply, C070FW02 V0 electronic board, C070FW02 V0 VGA board, C070FW02 V0 touchscreen available.

Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112