Search This Blog

Working principle of slow wire processing

 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much better t

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette

Introduction of KOVAR parts

KOVAR parts are commonly used as metal casing materials in the electronic packaging industry. Because they have a linear expansion coefficient close to that of molybdenum group glass, and can produce less sealing stress during the sealing (melting) process with molybdenum group glass, so To obtain good air-tightness, in order to make the metal tube and shell to achieve air-tight sealing, in the entire sealing process, the annealing process undoubtedly plays an important role as a link between the previous and the next. The internal stress generated during KOVAR  machining also prepares the material structure for the implementation of the subsequent process-the sealing process of the metal parts. The main purpose of annealing Kovar shell before sealing is to: (1) Eliminate machining stress. When Kovar undergoes plastic machining deformation during cold working, about 10% to 15% of the applied energy is converted into internal energy, which is commonly referred to as internal stress,

The market for auto parts is becoming increasingly fierce


There will be unprecedented fierce competition in the domestic market for auto parts. In the face of this new change, the member factories of the “Automotive Federation” must actively prepare for the challenge. Make use of strengths and avoid weaknesses, and give full play to group advantages. In recent years, the member factories of the “Jin Auto Union” have gained a place in the auto parts industry market based on product quality, reputation and service attitude, and won the trust of the majority of users. However, some member factories are agricultural machinery system enterprises after all, and their product sales are affected. However, the agricultural machinery system has more than 200 agricultural machinery parts sales departments above the county level. In recent years, under the situation of reform and opening up, most of these sales departments have carried out the business of auto parts, and there are many sales departments dealing in auto parts. The business volume is still very large. The member factories should actively develop this potential market, make good use of the two annual agricultural machinery ordering meetings, and sign the contract for the supply of auto parts at the same time as the contract for agricultural machinery parts.

Capture market dynamics and seize key models. The current situation in the automobile market is different. Domestic-made diesel vehicles are popular because they have better power performance, low fuel prices and easier solutions. Especially in rural areas, people are willing to buy diesel vehicles, so the sales continue to be optimistic, so they are supporting diesel vehicles. Most of these diesel engine models are produced by agricultural machinery system manufacturers, and most of their supporting manufacturers are agricultural Supply repair parts. Therefore, we must seize this goal, work hard on these models, find a way, and conscientiously do a full-scale service in the production of supporting and social maintenance accessories and pre-sales, sales and after-sales.

The automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.

Link to this article:The market for auto parts is becoming increasingly fierce

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cnc Machining,Thank

Contact Us

Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province.