Search This Blog

Working principle of slow wire processing

by
 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much better t
Image

Hydrostatic guideway of CNC machining lathe

by
The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette

Introduction of KOVAR parts

by
KOVAR parts are commonly used as metal casing materials in the electronic packaging industry. Because they have a linear expansion coefficient close to that of molybdenum group glass, and can produce less sealing stress during the sealing (melting) process with molybdenum group glass, so To obtain good air-tightness, in order to make the metal tube and shell to achieve air-tight sealing, in the entire sealing process, the annealing process undoubtedly plays an important role as a link between the previous and the next. The internal stress generated during KOVAR  machining also prepares the material structure for the implementation of the subsequent process-the sealing process of the metal parts. The main purpose of annealing Kovar shell before sealing is to: (1) Eliminate machining stress. When Kovar undergoes plastic machining deformation during cold working, about 10% to 15% of the applied energy is converted into internal energy, which is commonly referred to as internal stress,
Image
Menu

Use ether-based fuel cost and price competition advantages to enter the market

cncmachining December 22, 2021

 

Formulate marketing strategies for ether-based fuel products. Take advantage of ether-based fuel cost and price competition to enter the market. Use the absolute advantage of ether-based fuel cost and price competition, adopt a marketing strategy that benefits users and consumers, land on the market, and gradually expand. This is the entry of ether-based fuel into thousands of cities in China. Baidi's vast market.

Utilize the advantages of ether-based fuels in energy saving and environmental protection to enter large and medium-sized cities. Utilize the advantages of ether-based fuels in energy saving and environmental protection, enter large and medium-sized urban areas, enter urban bus companies, rental companies and large transportation companies, so that ether-based fuels have image characteristics and scale. A huge image strategy project with great benefits and praise from the public.

Strengthen basic theoretical research and guide the scientific development of the ether-based fuel industry strategy. New alternative energy. The ether-based fuel industry strategy is a very complex and extremely high-tech industry. To scientifically develop the industrialization of ether-based fuels, there must be ether-based fuels. The basic research on ether-based fuels is not yet in place, and even no relevant systems and independent theoretical disciplines have been formed. Since then, strengthening the basic research of ether-based fuels, including basic theoretical research, is a A very urgent scientific task.

The automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.

Link to this article：Use ether-based fuel cost and price competition advantages to enter the market

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank

Facebook Twitter Whatsapp
Next
Prev Post
Previous
Next Post

Contact Us

Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province.  860769-82886112
 860769-82886112
© Copyright 2020 Advance China 5 Axis CNC Machining Shop. Designed by PTJ Shop.