Search This Blog

Working principle of slow wire processing

 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much better t

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette

Introduction of KOVAR parts

KOVAR parts are commonly used as metal casing materials in the electronic packaging industry. Because they have a linear expansion coefficient close to that of molybdenum group glass, and can produce less sealing stress during the sealing (melting) process with molybdenum group glass, so To obtain good air-tightness, in order to make the metal tube and shell to achieve air-tight sealing, in the entire sealing process, the annealing process undoubtedly plays an important role as a link between the previous and the next. The internal stress generated during KOVAR  machining also prepares the material structure for the implementation of the subsequent process-the sealing process of the metal parts. The main purpose of annealing Kovar shell before sealing is to: (1) Eliminate machining stress. When Kovar undergoes plastic machining deformation during cold working, about 10% to 15% of the applied energy is converted into internal energy, which is commonly referred to as internal stress,

No matter where you are, we are always stable

Miyang H38

No matter where you are, we are always stable

Accurate algorithm, no fear of vibration

Intelligent anti-shake, more stable

Intelligent anti-shake technology algorithm, support HDR image sharpening, WDR full dynamic, electronic anti-shake and other image processing technologies, correct arc deformation, can effectively avoid image blur caused by motion, and present real high-definition image quality.

Seamless video recording, recording every moment in real time

Loop recording without missing seconds

Automatic coverage, smarter

Set the length of the cycle time according to the need. After the function is turned on, the card will automatically start to overwrite the previously recorded video when recording, without manual deletion, to truly achieve seamless recording.

 

During the driving, different roads may be passed, and the conditions of the roads will cause the bumps of the vehicle, which will affect the recording of images by ordinary dash cams. It is difficult to obtain a stable picture from the recorded images in this process, and there are hidden dangers to the safety of driving. The scientific and intelligent anti-shake technology arithmetic adopted by Mi Yang can solve this problem accurately.

We want to ensure your safety, this is the prerequisite for all technology to be able to embody

Track Departure Warning System

Track alarm, foresight

The track deviation early warning system is a system that assists the driver to reduce traffic accidents due to lane departure by warning. Image recognition processing technology is used to determine whether the vehicle has deviated from the lane. To prevent traffic accidents caused by the driver’s brief distraction, the warning sound is immediately issued when the vehicle is improperly shifted. This allows the driver to take immediate action and return to the original front of the vehicle, making it safer for the owner to drive.

During the driving, different roads may be passed, and the conditions of the roads will cause the bumps of the vehicle, which will affect the recording of images by ordinary dash cams. It is difficult to obtain a stable picture from the recorded images in this process, and there are hidden dangers to the safety of driving. The scientific and intelligent anti-shake technology arithmetic adopted by Mi Yang can solve this problem accurately.

The automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.
<p style="fon

Link to this article:No matter where you are, we are always stable

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cnc Machining,Thank

Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112