Search This Blog

Working principle of slow wire processing

 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much better t

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette

Elimination of Gear Backlash in CNC Machining Feed System

Elimination of Gear Backlash in CNC Machining Feed System   The transmission gear in the feed system of the CNC machining machine tool must eliminate the transmission gap between the meshing gears as much as possible, otherwise the motion will lag behind the command signal after each reversal of the feed system, which will affect the machining accuracy (accuracy) ). There are the following two common methods for CNC machining machine tools to eliminate the transmission gear gap.   1. Rigidity adjustment method   The rigid adjustment method is an adjustment method that cannot be automatically compensated for the tooth side clearance after adjustment. Therefore, the pitch tolerance and tooth thickness of the gear must be strictly controlled, otherwise the flexibility of the transmission will be affected. This adjustment method has a relatively simple structure and a better transmission rigidity.   (1) Eccentric shaft adjustment method   As shown in Figure 610, the gear 1 is mounted on th

Intelligent strategy for the operation of auto parts

Generally speaking, the price of products operated online is lower than that of traditional accessory stores. The quality of the accessories is the same. Who doesn’t want the low price to be the next best thing? From the perspective of the merchant, the implementation of networked operation can reduce the price. Sales expenses enhance market competitiveness.

Merchants can use the Internet to quickly collect market information, analyze market clearing, weave supply in time, minimize inventory, increase the circulation of Shaanxi capital, and * until the goal of reducing costs is finally achieved, there will always be auto parts sold by sellers. Some are selling well, while others are not selling well.

The expenses caused by the funds occupied by the sodium-stagnation part must be allocated to the car to be sold. With the Big Five Networks, sellers can avoid rabbits and quietly sell the same products in the market. The price of the same products is lower than others under the premise of the same profit. Their competitiveness is enhanced, and the number of customers who come to buy will gradually increase. Sodium growth has increased, and there is still no money to make. For manufacturers, the benefits of “networking” are also multifaceted.

Auto parts production, homes can get sales information from the market feedback from the sellers in time, and the film can analyze consumers' buying intentions based on this, so as to produce auto parts that meet market demand as soon as possible. In addition, manufacturers can learn about the inventory of parts sellers in time to adjust the allocation plan of parts, thereby helping manufacturers to reduce the production of auto parts.

Therefore, it is natural for the auto parts business to be networked. Returning to reality, our existing foundation and conditions are still difficult to truly meet the requirements of developing networked operations. Because real-world networking requires capital and talents as the foundation, in addition to capital and talents, a complete distribution system and a secure payment system are needed to realize networked operations. As we all know, building a website first requires huge amounts of funds and high-quality talents.

Some people say that the money spent in the website operation process is “burning money.” The professional websites that have recently closed down are rarely due to poor management or management. Most of them are due to lack of sufficient funds. Compared with other industries, they have a lot of funds, ranging from a few million to tens of millions, but after all, the speed of making money is not as fast as the speed of 'burning money'.

And nowadays, it's not bad if the sales revenue of an accessory business can reach one million a year, let alone a tens of millions, who has the ability to build a website. In addition, since the Internet has only entered our country for a few years, There is still a shortage of network talents who truly understand both technology and business operations. Without the two necessary conditions of capital and talents, it is easy to talk about the realization of networked auto parts business. Some people would say that it is always possible for ordinary websites to cooperate with sales merchants and manufacturers to realize networkization.

But what we cannot ignore is that it is impossible to achieve a networked operation without a complete distribution system and secure payment methods. It is absolutely not cost-effective for each company to build this set of distribution system by itself. Therefore, it is foreseeable that with the acceleration of the networked process of auto parts circulation, it will definitely drive the development of this service field. However, how to use the existing distribution network or build a parts distribution system by yourself will be a key problem to be solved in the field of auto parts circulation in China.

Of course, there is one more thing to mention, our consumption concept can not meet the requirements of “networking”. Transactions in the United States and above are done through “electronic money.” Although all major banks in China have launched credit card consumption business, people are still accustomed to using cash for consumption because it is difficult to get rid of traditional consumption concepts for a while, and the utilization rate of “electronic money” is not as high as that of online shopping. .

To change this consumption concept and habit, it cannot be done by a single individual’s efforts or a government document. It needs to be gradually changed over time. Without the “electronics” of transactions, there can be no “networking” of operations. Based on the above analysis, it is not difficult for us to come to the conclusion that it is not advisable to blindly pursue the networkization of auto parts management based on the existing foundation and conditions. Otherwise, the low cost of “networking” will be changed to maintain the normal operation of the website. High cost.

It's not a good time to realize the network of business. Although, in terms of the overall environment, it is still very difficult for China’s auto parts business to truly realize the network, but it does not mean that we must stay away from the Internet. Because networked operation of auto parts is the only way to reform the auto parts industry. “Networking” is a trend after all, and it is only a matter of time. So, how can we make the auto parts business that I pay closer to “networking”? We often talk about “starting from our country’s national conditions and taking the road of socialism with Chinese characteristics” to achieve “networking”. The same is true for China’s auto parts The development of online sales should suit the national conditions of the country and take the road of A-network management with Chinese characteristics.

The automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.

Link to this article:Intelligent strategy for the operation of auto parts

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cnc Machining,Thank

Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112