Search This Blog

Working principle of slow wire processing

 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much better t

Classification of CNC Machining Occupation Levels

1. Blue-collar layer:   That is, CNC machining operation technicians, proficient in machining and CNC machining process knowledge, proficient in the operation and manual programming of CNC machine tools (attributes: automated machine tools), understand automatic programming and simple maintenance of CNC machine tools (attributes: automated machine tools), such There is a large market demand for personnel, and they are suitable for operating workers of CNC machine tools (attributes: automated machine tools) in the workshop, but due to their single knowledge, their wages will not be much higher.   2. Gray collar layer:   One, CNC machining programmer:   Master the knowledge of 5 Axis CNC machining Aluminum   technology and the operation of CNC machine tools (attributes: automated machine tools), be familiar with the design and manufacturing expertise of complex molds (title: mother of industry), and be proficient in 3D CAD/CAM software, such as UG, GOOGLE PRO/E, etc. ; Familiar with CNC

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette

Mitsubishi AA084VC04

Mitsubishi AA084VC04
#AA084VC04 Mitsubishi AA084VC04 New Mitsubishi 8.4 inch LCM 640×480 480 500:1 65/65/50/60 262K CCFL TTL, AA084VC04 pictures, AA084VC04 price, #AA084VC04 supplier
-------------------------------------------------------------------
Email: [email protected]

-------------------------------------------------------------------
Brand Mitsubishi
Model AA084VC04
Diagonal Size 8.4 inch
Type a-Si TFT-LCD, LCM
Pixel Format 640(RGB)×480  [VGA]  95PPI
Configuration RGB Vertical Stripe
Active Area 170.88(H)×128.16(V) mm
Outline Dim 199.5(H)×149(V) ×12(D) mm
Bezel Area 174.9(H)×132.2(V) mm
Treatment Hard coating (2H), Antireflection
Luminance 480 cd/m² (Typ.)
Contrast Ratio 500:1 (Typ.) (TM)    
View Direction 6 o'clock
Response Time 6/19 (Typ.)(Tr/Td)
Viewing Angle 65/65/50/60 (Typ.)(CR≥10) Left / Right / Up / Down
Operating Mode TN, Normally White, Transmissive
Support Color 262K   39% NTSC
Light Source CCFL  [2 pcs] , 50K hours , W/O Driver
Weight360g (Typ.) Designed For Industrial
Frame Rate60Hz 
120Hz (60HZ Input) : Embedded MEMC Circuit
120Hz+120Hz : 120Hz Panel+120Hz Backlight
240Hz (60HZ Input) : Embedded MEMC Circuit
Touch Panel Without
Interface Type CMOS (1 ch, 6-bit) , 31 pins Connector
Power Supply 3.3V (Typ.)(VCC)
Environment Operating Temperature: -20 ~ 70 °C ; Storage Temperature: -20 ~ 80 °C
AA084VC04 inverter, AA084VC04 power supply, AA084VC04 electronic board, AA084VC04 VGA board, AA084VC04 touchscreen available.

Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112