Search This Blog

Working principle of slow wire processing

 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much bett...

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form o...

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form o...

AUO G121SN01 V403

AUO G121SN01 V403
#G121SN01 V403 AUO G121SN01 V403 New AUO 12.1 inch LCM 800×600 500 700:1 80/80/65/75 262K/16.2M WLED LVDS, G121SN01 V403 pictures, G121SN01 V403 price, #G121SN01 V403 supplier
-------------------------------------------------------------------
Email: [email protected]

-------------------------------------------------------------------
Brand AUO
Model G121SN01 V403
Diagonal Size 12.1 inch
Type a-Si TFT-LCD, LCM
Pixel Format 800(RGB)×600  [SVGA]  82PPI
Configuration RGB Vertical Stripe
Active Area 246(H)×184.5(V) mm
Outline Dim. 279(H)×209(V) mm
Bezel Area 249.05(H)×188.3(V) mm
Treatment Antiglare, Hard coating (3H)
Luminance 500 cd/m² (Typ.)
Contrast Ratio 700:1 (Typ.) (TM)    
View Direction 6 o'clock
Response Time 25/10 (Typ.)(Tr/Td)
Viewing Angle 80/80/65/75 (Typ.)(CR≥10) Left / Right / Up / Down
Operating Mode TN, Normally White, Transmissive
Support Color 262K/16.2M   55% NTSC
Light Source WLED  [7S3P] , 50K hours , With LED Driver
Weight 750g (Max.)
Designed For Industrial
Frame Rate 60HzTouch PanelWithout
Interface Type LVDS (1 ch, 6/8-bit) , 20 pins Connector
Power Supply 3.3V (Typ.)
Environment Operating Temperature: -30 ~ 85 °C ; Storage Temperature: -30 ~ 85 °C
G121SN01 V403 inverter, G121SN01 V403 power supply, G121SN01 V403 electronic board, G121SN01 V403 VGA board, G121SN01 V403 touchscreen available.

Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112