Search This Blog

Working principle of slow wire processing

 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much better t

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette

AUO B150XG02 V3

AUO B150XG02 V3
#B150XG02 V3 AUO B150XG02 V3 New AUO 15inch LCM 1024×768 180 300:1 40/40/10/30 262K CCFL LVDS, B150XG02 V3 pictures, B150XG02 V3 price, #B150XG02 V3 supplier
-------------------------------------------------------------------
Email: [email protected]

-------------------------------------------------------------------
Manufacturer AUO
Model Name B150XG02 V3 (AUO0F07) 
Screen Size 15.0 inch
Screen Type LCM,   a-Si TFT-LCD
Pixel Number 1024(RGB)×768   (XGA)  85PPI
Arrangement RGB Vertical Stripe
Active Area(mm) 304.128 × 228.096 (H×V)
Outline(mm) 317.3 × 253.75 × 6.4 (H×V×D)
Bezel Area(mm) 307.53 × 231.5 (H×V)
Treatment Hard coating (3H)
Luminance 180 cd/m² (Typ.)
Contrast Ratio 300 : 1 (Typ.) (TM)    
Viewing Angle 40/40/10/30 (Min.)(CR≥10) Left / Right / Up / Down
Response 16/9 (Typ.)(Tr/Td) ms
Good View at 6 o'clock
Work Mode TN, Normally White, Transmissive
Color Depth 262K   42% NTSC
Backlight 1 pcs CCFL , No Driver
Outline Shape Wedge (PCBA Bent, T≥5.2mm)
Used for Laptop
Refresh Rate 60Hz
120Hz (60HZ Input) : Embedded MEMC Circuit
120Hz+120Hz : 120Hz Panel+120Hz Backlight
240Hz (60HZ Input) : Embedded MEMC Circuit
Touchscreen Without
Signal Type LVDS (1 ch, 6-bit) , Connector 30 pins
Voltage Supply 3.3V (Typ.)
Max. Ratings Storage Temp.: -25 ~ 65 °C    Operating Temp.: 0 ~ 50 °C   
B150XG02 V3 inverter, B150XG02 V3 power supply, B150XG02 V3 electronic board, B150XG02 V3 VGA board, B150XG02 V3 touchscreen available.

Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112