Search This Blog

Working principle of slow wire processing

 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much bett...

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form o...

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form o...

NEC NL2432HC22-40J

NEC NL2432HC22-40J
#NL2432HC22-40J NEC NL2432HC22-40J New NEC 3.5inch LCM 240×320 220 150:1 35/35/35/35 262K WLED TTL, NL2432HC22-40J pictures, NL2432HC22-40J price, #NL2432HC22-40J supplier
-------------------------------------------------------------------
Email: [email protected]

-------------------------------------------------------------------
Brand NEC
Model NL2432HC22-40J  
Diagonal Size 3.5 inch
Type a-Si TFT-LCD , LCM 
Pixel Format 240(RGB)×320  [QVGA]  113PPI
Configuration RGB Vertical Stripe
Active Area 53.64(H)×71.52(V) mm
Outline Dim. 63.5(H)×85(V) ×3.2(D) mm
Treatment Clear, Hard coating (3H)
Luminance 220 cd/m² (Typ.)
Contrast Ratio 150:1 (Typ.) (TM)     15:1 (Typ.) (RF)
Response Time 7/23 (Typ.)(Tr/Td)
Viewing Angle 35/35/35/35 (Typ.)(CR≥10) Left / Right / Up / Down
Operating Mode TN, Normally White, Transflective
Support Color 262K   40% NTSC
Light Source WLED  [5S1P] , W/O Driver
Weight 25.0/28.0g (Typ./Max.)
Designed For Handheld & PDA
Frame Rate 60Hz
120Hz (60HZ Input) : Embedded MEMC Circuit
120Hz+120Hz : 120Hz Panel+120Hz Backlight
240Hz (60HZ Input) : Embedded MEMC Circuit
Touch Panel Without
Interface Type CMOS (1 ch, 6-bit) + SPI , 45 pins FPC
Power Supply 3.0V (Typ.) 
Environment Operating Temperature: -20 ~ 70 °C ; Storage Temperature: -20 ~ 80 °C ; Vibration Level: 2.0G (19.6 m/s²)
NL2432HC22-40J inverter, NL2432HC22-40J power supply, NL2432HC22-40J electronic board, NL2432HC22-40J VGA board, NL2432HC22-40J touchscreen available.

Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112