Search This Blog

Working principle of slow wire processing

 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much better t

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette

Introduction of KOVAR parts

KOVAR parts are commonly used as metal casing materials in the electronic packaging industry. Because they have a linear expansion coefficient close to that of molybdenum group glass, and can produce less sealing stress during the sealing (melting) process with molybdenum group glass, so To obtain good air-tightness, in order to make the metal tube and shell to achieve air-tight sealing, in the entire sealing process, the annealing process undoubtedly plays an important role as a link between the previous and the next. The internal stress generated during KOVAR  machining also prepares the material structure for the implementation of the subsequent process-the sealing process of the metal parts. The main purpose of annealing Kovar shell before sealing is to: (1) Eliminate machining stress. When Kovar undergoes plastic machining deformation during cold working, about 10% to 15% of the applied energy is converted into internal energy, which is commonly referred to as internal stress,

SHARP LQ121S1LG88

SHARP LQ121S1LG88
#LQ121S1LG88 SHARP LQ121S1LG88 New LQ121S1LG88 Sharp 12.1 inch LCM 800×600 450 800:1 80/80/60/80 262K WLED LVDS, LQ121S1LG88 pictures, LQ121S1LG88 price, #LQ121S1LG88 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Panel Brand Sharp
Panel Model LQ121S1LG88
Panel Size 12.1"
Panel Type a-Si TFT-LCD , LCM 
Resolution 800(RGB)×600, SVGA, 82PPI
Pixel Format RGB Vertical Stripe
Display Area 246(W)×184.5(H) mm
Bezel Opening 249.0(W)×187.5(H) mm
Outline Size 276(W)×209(H) ×9.6(D) mm
Surface Antiglare, Hard coating (3H)
Brightness 450 cd/m² (Typ.)
Contrast Ratio 800:1 (Typ.) (TM)    
Viewing Angle 80/80/60/80 (Typ.)(CR≥10)
Display Mode TN, Normally White, Transmissive 
Best View on 6 o'clock
Response Time 30 (Typ.)(Tr+Td)
Display Colors 262K   53% NTSC
Lamp Type WLED , 50K hours , With LED Driver
Frequency 60Hz 
Touch Screen Without
Weight 750g (Max.)
Signal Interface LVDS (1 ch, 6-bit) , 20 pins Connector
Input Voltage 3.3V (Typ.)
Environment Operating Temp.: -15 ~ 70 °C ; Storage Temp.: -30 ~ 80 °C
 
LQ121S1LG88 inverter, LQ121S1LG88 power supply, LQ121S1LG88 electronic board, LQ121S1LG88 VGA board, LQ121S1LG88 touchscreen available.

Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112