Search This Blog

Working principle of slow wire processing

 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much better t

Spring Design Attention And Roll Forming Method

Spring Design Attention And Roll Forming Method The coiling characteristics and methods of springs are divided into cold coiling method and hot coiling method. Cold winding method: When the diameter of the spring wire is less than 8mm, the cold winding method is adopted. High-quality carbon spring steel wire is usually first cold drawn and then heat treated. After winding, it is generally not quenched, but only tempered at low temperature to eliminate the internal stress during winding. Hot-rolling method: Springs with larger diameter (>8mm) spring wire should use hot-rolling method. Hot rolled springs must be quenched and tempered at medium temperature. The Design Process Of Various Springs ·          Installation space: When designing a  compression spring , it is necessary to have a clear understanding of the space required for the installation of the spring, in order to effectively grasp the basic manufacturing conditions of the compression spring, including the outer diam

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette

AUO G150XTN03.0

AUO G150XTN03.0
#G150XTN03.0 AUO G150XTN03.0 New G150XTN03.0 AUO 15.0inch Panel 1024×768 700:1 262K/16.2M WLED LVDS , G150XTN03.0 pictures, G150XTN03.0 price, #G150XTN03.0 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Panel Brand : AUO
Panel Model : G150XTN03.0 
Panel Type : a-Si TFT-LCD , Panel 
Panel Size : 15.0 inch
Resolution : 1024(RGB)×768 , XGA 
Display Mode : TN, Normally White, Transmissive 
Active Area : 304.128×228.096 mm
Outline : 326.5×253.5×12 mm
Surface : Antiglare, Hard coating (3H) 
 Brightness : 350 cd/m² (Typ.) 
Contrast Ratio : 700:1 (Typ.)  
Display Colors : 262K/16.2M   (6-bit / 6-bit + FRC) , CIE1931 60%  
Response Time : 5.7/2.3 (Typ.)(Tr/Td) 
Viewing Angle : 85/85/80/80 (Typ.)(CR≥10) (L/R/U/D) 
Frequency : 60Hz  
Lamp Type : WLED       Embedded (LED Driver)
Signal Interface : LVDS (1 ch, 6/8-bit) , 20 pins  
Input Voltage : 3.3V (Typ.) 
 
G150XTN03.0 inverter, G150XTN03.0 power supply, G150XTN03.0 electronic board, G150XTN03.0 VGA board, G150XTN03.0 touchscreen available.

Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112