Search This Blog

Working principle of slow wire processing

 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much better t

Classification of CNC Machining Occupation Levels

1. Blue-collar layer:   That is, CNC machining operation technicians, proficient in machining and CNC machining process knowledge, proficient in the operation and manual programming of CNC machine tools (attributes: automated machine tools), understand automatic programming and simple maintenance of CNC machine tools (attributes: automated machine tools), such There is a large market demand for personnel, and they are suitable for operating workers of CNC machine tools (attributes: automated machine tools) in the workshop, but due to their single knowledge, their wages will not be much higher.   2. Gray collar layer:   One, CNC machining programmer:   Master the knowledge of 5 Axis CNC machining Aluminum   technology and the operation of CNC machine tools (attributes: automated machine tools), be familiar with the design and manufacturing expertise of complex molds (title: mother of industry), and be proficient in 3D CAD/CAM software, such as UG, GOOGLE PRO/E, etc. ; Familiar with CNC

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette

WiseChip UG-2828GDEDF11

WiseChip UG-2828GDEDF11
#UG-2828GDEDF11 WiseChip UG-2828GDEDF11 New UG-2828GDEDF11 WiseChip 1.5 inch OLED 128×128 90 10000:1 262K self CPU/SPI, UG-2828GDEDF11 pictures, UG-2828GDEDF11 price, #UG-2828GDEDF11 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Model Name: UG-2828GDEDF11 
Screen Size: 1.5 inch Screen
Type: OLED,   PM-OLED
Pixel Number: 128(RGB)×128 
Arrangement RGB Vertical Stripe
Active Area(mm): 26.855 × 26.864 (H×V)
Outline(mm): 33.8 × 34 × 1.7 (H×V×D)
Bezel Area(mm): 28.855 × 28.864 (H×V)
Treatment Antiglare
Luminance: 90 cd/m² (Typ.) Contrast Ratio 10000 : 1 (Typ.) (TM)    
Viewing Angle: 80/80/80/80 (Min.) Left / Right / Up / Down 
Good View at Symmetry Work Mode-
Color Depth262K   63% (CIE1931) Backlight self , 10K hours
Mass 3.75±0.38g Used forMobile Phone
Refresh Rate- TouchscreenWithout
Driver IC list Built-in COF SSD1351 
Signal Type 8-bit 6800/8080 parallel, 3/4-wire SPI , FPC , 30 pins
Voltage Supply2.8/2.5/1.8/13V (Typ.)(VCI/VDD/VDDIO/VCC)
Max. Ratings Storage Temp.: -40 ~ 80 °C    Operating Temp.: -40 ~ 70 °C  
UG-2828GDEDF11 inverter, UG-2828GDEDF11 power supply, UG-2828GDEDF11 electronic board, UG-2828GDEDF11 VGA board, UG-2828GDEDF11 touchscreen available.

Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112