Search This Blog

Working principle of slow wire processing

 Slow wire walking, also called low-speed wire walking, is a kind of CNC machining machine tool that uses continuously moving fine metal wire as an electrode to pulse spark discharge on the workpiece to generate a high temperature of over 6000 degrees, ablate metal and cut into a workpiece. The principle of wire processing is the phenomenon that there is a gap between the wire electrode and the workpiece, and the metal is removed by continuous discharge. Since the slow-moving wire cutting machine adopts the method of wire electrode continuous feeding, that is, the wire electrode is processed during the movement, so even if the wire electrode is worn out, it can be continuously supplemented, so it can improve the machining accuracy of the parts and slow the wire. The surface roughness of the workpiece processed by the cutting machine can usually reach Ra=0.8μm and above, and the roundness error, linear error and dimensional error of the slow-moving wire cutting machine are much bett...

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form o...

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form o...

ST M25P10-AVMN6P

ST M25P10-AVMN6P
#M25P10-AVMN6P ST M25P10-AVMN6P New M25P10-AVMN6P NOR Flash Lo-Volt 1M (128Kx8) , M25P10-AVMN6P pictures, M25P10-AVMN6P price, #M25P10-AVMN6P supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Manufacturer: STMicroelectronics 
Product Category: NOR Flash 
RoHS:  Details  
Mounting Style: SMD/SMT 
Package / Case: SO-8 
Series: M25P 
Memory Size: 1 Mbit 
Maximum Clock Frequency: 50 MHz 
Interface Type: SPI 
Organization: 128 k x 8 
Timing Type: Synchronous 
Data Bus Width: 8 bit 
Supply Voltage - Min: 2.7 V 
Supply Voltage - Max: 3.6 V 
Supply Current - Max: 8 mA 
Minimum Operating Temperature: - 40 C 
Maximum Operating Temperature: + 85 C 
Packaging: Tube 
Memory Type: NOR  
Speed: 50 MHz  
Architecture: Sector  
Brand: STMicroelectronics  
Moisture Sensitive: Yes  
Product Type: NOR Flash  
Standard: Not Supported  
Factory Pack Quantity: 100  
Subcategory: Memory & Data Storage  
Unit Weight: 0.017870 oz

M25P10-AVMN6P NOR Flash Lo-Volt 1M (128Kx8)

Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112