Search This Blog

How to prevent deformation during slow wire processing

 Slow-moving wire processing is a very exquisite and exquisite craft, and sufficient preparations need to be made, so that the processed products can be more quality. The slow-moving wire processing technology has a wide range of applications and is a must in our industries. If you want to do better with less technology, you must master all aspects of the processing knowledge. For example, the most common thing is the deformation during processing.  How can we solve it How to prevent deformation during slow wire processing Speaking of slow wire processing, it uses continuously moving fine metal wires as electrodes. Pulse spark discharge is performed on the workpiece, where it generates a high temperature above 6000 degrees. Moreover, if it wants to improve its quality problems and prevent its deformation, it can firstly start from the following aspects. 1. To prevent deformation, it is impossible for the material to have no internal stress. In particular, the internal stress of the que

KOVAR parts seal preparation and physical properties

Kovar® is a vacuum-melted iron-nickel-cobalt low-expansion alloy. The chemical composition content is controlled in a very narrow range to ensure accurate and balanced thermal expansion performance. At the same time, strict quality control during the manufacturing process of KOVAR machining parts also ensures balance Its physical and mechanical properties are more suitable for deep drawing, stamping and various cutting processes. Material use Kovar® is used for vacuum sealing of hard glass and ceramics, and is widely used in electron tubes, microwave tubes, transistors and diodes. On integrated circuits, it is used for flat integrated circuits and dual in-line packages. Seal preparation All parts made by Kovar® should be degassed and annealed in a wet hydrogen atmosphere. Hydrogen is injected into water at room temperature and gets wet through blisters. Care must be taken to prevent surface carbonization. The heat treatment furnace must have a cooling chamber that provides the same a

What are the rules for metal stamping die scrap tube?

The Purpose Standardize the management of the scrapping of the company's metal stamping dies, prevent the loss of company assets, and formulate this system specially. Scope of application It is suitable for the management of the company's scrap molds. Definition If the molds listed in the assets of the company fall under one of the following circumstances, the use management department may apply for scrapping. 1. Molds that exceed the specified service life. 2. The mold is severely damaged by accidents or accidents, and molds that cannot be repaired or have no repair value. 3. Metal stamping dies that have not reached the service life, but due to safety, quality, efficiency and other issues, the repair still fails to meet the minimum requirements of the customer's product process or affects the production safety and efficiency. 4. Product customers have stopped placing orders or have not placed orders for molds in several years. 4. Responsibilities 1. Responsibilities of th

Eview MT506LV4CN

Eview MT506LV4CN
#MT506LV4CN Eview MT506LV4CN New TOUCH PANEL, MT506LV4CN pictures, MT506LV4CN price, #MT506LV4CN supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------

Install Environment

Where Used


The MT-500 Series is designed for use in a factory environment. It is designed to
operate from 32 to 113 °F (0 to 45 °C) temperatures, as found in most industrial
environments. It may not be suitable for use in certain outdoor applications. Please
consult the factory for advised usage in outdoor applications.
 

NEMA Rating


The MT-500 Series front bezel is NEMA 4 rated. When installed properly in a NEMA
4 panel, the NEMA 4 rating of the panel will not be compromised. This means that
fluids will not enter the panel during wash downs.
 

Electrical Environment


The MT-500 Series has been tested to conform to European CE requirements. This
means that the circuitry is designed to resist the effects of electrical noise. This does
not guarantee noise immunity in severe cases. Proper wire routing and grounding
will insure proper operation.
 

Mechanical Environment


Avoid installing units in environments where severe mechanical vibration or shocks
are present. 

Panel Details


The unit can be mounted into panels with a depth of 4” (105mm). It is recommended that the unit be mounted on the front panel of a steel enclosure, through an appropriate opening*. Allow a clearance of 1”(25mm) around the sides of the unit for mounting hardware. Allow clearance for cable connections to the back of the unit. Unit depth may vary according to cable type used. Typically, plan a depth to accommodate at least 4” (105mm) behind the panel.

NEMA-4 Mounting


Put the unit through the panel cut out. Slide the clamps into the 6 holes provided around the case. Tighten the clamping screws in an even pattern until the unit is secured in the panel.
MT506LV4CN inverter, MT506LV4CN power supply, MT506LV4CN electronic board, MT506LV4CN VGA board, MT506LV4CN touchscreen available.

Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112