Search This Blog

How to prevent deformation during slow wire processing

 Slow-moving wire processing is a very exquisite and exquisite craft, and sufficient preparations need to be made, so that the processed products can be more quality. The slow-moving wire processing technology has a wide range of applications and is a must in our industries. If you want to do better with less technology, you must master all aspects of the processing knowledge. For example, the most common thing is the deformation during processing.  How can we solve it How to prevent deformation during slow wire processing Speaking of slow wire processing, it uses continuously moving fine metal wires as electrodes. Pulse spark discharge is performed on the workpiece, where it generates a high temperature above 6000 degrees. Moreover, if it wants to improve its quality problems and prevent its deformation, it can firstly start from the following aspects. 1. To prevent deformation, it is impossible for the material to have no internal stress. In particular, the internal stress of the que

KOVAR parts seal preparation and physical properties

Kovar® is a vacuum-melted iron-nickel-cobalt low-expansion alloy. The chemical composition content is controlled in a very narrow range to ensure accurate and balanced thermal expansion performance. At the same time, strict quality control during the manufacturing process of KOVAR machining parts also ensures balance Its physical and mechanical properties are more suitable for deep drawing, stamping and various cutting processes. Material use Kovar® is used for vacuum sealing of hard glass and ceramics, and is widely used in electron tubes, microwave tubes, transistors and diodes. On integrated circuits, it is used for flat integrated circuits and dual in-line packages. Seal preparation All parts made by Kovar® should be degassed and annealed in a wet hydrogen atmosphere. Hydrogen is injected into water at room temperature and gets wet through blisters. Care must be taken to prevent surface carbonization. The heat treatment furnace must have a cooling chamber that provides the same a

What are the rules for metal stamping die scrap tube?

The Purpose Standardize the management of the scrapping of the company's metal stamping dies, prevent the loss of company assets, and formulate this system specially. Scope of application It is suitable for the management of the company's scrap molds. Definition If the molds listed in the assets of the company fall under one of the following circumstances, the use management department may apply for scrapping. 1. Molds that exceed the specified service life. 2. The mold is severely damaged by accidents or accidents, and molds that cannot be repaired or have no repair value. 3. Metal stamping dies that have not reached the service life, but due to safety, quality, efficiency and other issues, the repair still fails to meet the minimum requirements of the customer's product process or affects the production safety and efficiency. 4. Product customers have stopped placing orders or have not placed orders for molds in several years. 4. Responsibilities 1. Responsibilities of th

Do you know how to test the processing density of metal parts?

Metal parts processing density tester KW-300A, metal parts, refers to the collective name of various specifications and shapes of metal blocks, metal rods, metal tubes, etc. made of metal materials. In the production process, density is very important. One of the physical properties is that manufacturers need to strictly control the density of products.

KW-300A is a precision instrument composed of electronic machining balance, density software, density accessories, etc. It can quickly and conveniently measure the density of solids of various shapes, equipped with professional measuring accessories and transparent sinks. It is easy to carry, simple to operate, powerful, high precision and repeatable.

  • KW-300A parameters and features:
  • Weighing range: 0.005g~ 300g
  • Density/specific gravity accuracy: 0.001 g/cm3
  • Test time is about 5 seconds;
  • Display value density, volume temperature compensation;
  • Solution temperature can be set to 0~100℃/auto;
  • Compensation solution The compensation solution can be set to 19.999.

Directly read the density and volume of solid blocks, particles, and floating bodies of any shape with a density of >1 or <1, ​​with temperature compensation setting and solution compensation setting functions, more user-friendly operation, and more in line with the needs of field operations. The density measuring table is integrated by injection molding, which is convenient and quick to install and has a longer use time.

The one-piece anti-corrosion large sink design is adopted to reduce the error caused by the buoyancy of the hanging railing line, and it is also convenient to test larger bulk objects.

With the function of upper and lower density limits, it can judge whether the specific gravity of the test object is qualified or not. Equipped with buzzer device.

Built-in battery, equipped with windshield, more suitable for on-site testing. Applicable to: rubber, wire and cable, aluminum products, plastic particles, powder metallurgy, mineral rock, precision ceramics, glass industry, metal products, precision ceramics, refractory materials, magnetic materials, alloy materials, mechanical parts, metal recycling, minerals and Research laboratories for new materials such as rock, cement manufacturing, and jewelry industries.



Alan Lan

Foreign trade manager

General Manager's Office | Wonder Group

13712198704 | 15112807161
info@wonders-group.com
https://beryllium-copper.com/
No 3,Zhengda Road,Shatou Village,Chang'an Town,Dongguan City,Guangdong Province,China


Contact Us


Get In Touch or Get A Quote

Need an expert? you are more than welcomed to
leave your contact info and we will be in touch shortly
YOUR COMPANY
Sifangyuan Industrial Park, Xinshapu, Huaide Community
Humen town, Dongguan City, Guangdong Province. 
860769-82886112
860769-82886112